PRT PT561 Thermal Printer Label Mechanism PT561 for Weight Scale Shopping mall Supermarket

• Certification: CE, CCC, FCC
• Transport Package: Packed in Carton
• Specification: 238.4 * 118.2 * 97.2
• Trademark: PRT
• Origin: Xiamen, China
• Model NO.: PT561
• HS Code: 8443999090
• Production Capacity: /

Product Description

2 inch  Label Printer Mechanism PT561P

Introduction

1.The printer should be installed in a smooth, stable place.

2.Avoid put printer in vibrate and shock place.

3.Leave enough space around printer for operating and maintaining.

4.Printer should be away from water and avoid sunlight, highlight and heat source.

5.Do not use and preserve printer in high temperature, high humidity and seriously polluted place.

6.If you do not use the printer a long time, disconnect the printer.

7.The printer cannot print under the paperless condition, otherwise it will damage the print head seriously.

8.To ensure print quality and product life span, suggest using recommended paper and the same quality of paper

9.In satisfying use requirements cases, it is recommended to set as the concentration of low level printing, so as not to affect the life span of print head.

10.Avoid moist air condensing on the surface of the printer, if already formed, do not open until the dew elimination of the printer;

11.Avoid water or conductive material (e.g.: metal) from the interior, in the event, turn off the power immediately.

12.Plug or disconnect all interfaces, you must turn off the power, or may cause damage to the printer control circuit.

13.The users cannot disassemble the printer to do the overhaul themselves.

Specification

Print method	Thermal dot line printing
Paper type	Thermal label paper or thermal paper
Print width	56mm
Dots per line	448dots
Resolution	8 dots/mm
Paper width(Max)	62mm
Maximum printing speed	100mm/s
Paper roll outer diameter	Ф120mm(max)
Paper roll inter diameter	Ф25.4mm or Ф38.1mm or Ф40mm
Recommended paper	PD160R (OJI Paper CO.,LTD.)
Heater element pitch	0.125mm
Paper feed pitch	0.125mm
W * D * H (mm)	238.4 * 118.2 * 97.2
Heater print voltage	24V+10%
Life span (at 25ºC and rated energy) Activation pulse resistance Abrasion resistance	100 million pulses (print ratio=12.5%) 150 km or more
Operating temperature range (ºC)	0~50
Operating humidity (RH)	20%~85%
Storage temperature range (ºC)	-25~+70
Storage humidity(RH)	5%~90%

 
Factory