2 Inch 58mm PRT New Products Direct Label Printing Therma Printer Head Mechanism Without Cutter
1inch Thermal Printer Mechanism ,
1.5inch Thermal Printer Mechanism,
2inch Thermal Printer Mechanism,
3inch Thermal Printer Mechanism,
4inch Thermal Printer Mechanism,
6inch Thermal Printer Mechanism,
8inch Thermal Printer Mechanism ,label printer module
Characters:
1. Low voltage supply
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by a
3.0~ 5.5 V single power line, the range of operating voltage is 24V.
2. Low volume Compact and light
The mechanism is compact and light, dimensions: 259.5mm (length) * 38.5mm (width) *
48.4mm (height).
3. Printing with High resolution
A high-density printer head of 8 dots/mm make the printing clear and precise.
4. High speed printing
According to driving power and sensitivity of thermal paper, set different printing speed required.
Max printing speed is 50 mm/ sec.
5. Easy paper loading
Detachable rubber roller structure makes the paper loading easier.
6. Low noise
Thermal line dot printing is used to guarantee low-noise printing.
General Specifications:
Specifications:
| PRINTING CHARACTERISTICS |
| Printing method |
Direct line thermal |
| Resolution |
8 dots/mm |
| Max. Printing width |
48mm |
| Number of Dots |
384 |
| Paper width |
57.5±0.5mm |
| Printing speed |
100mm/s |
| Paper path |
Curved |
| DETECTION |
| Head Temperature |
By thermistor |
| Paper Out |
By photo interrupter |
| Platen Open |
NA |
| POWER SUPPLY |
| TPH Logic Voltage |
3.0V-5.5V |
| Drive Voltage |
4.2V - 9.5V |
| PEAK CURRENT |
| Head(Max.) |
2.64A(9.5V,48 dots) |
| Motor |
600mA |
| RELIABILITY |
| Pulse Activation |
100 million |
| Abrasion Resistance |
50KM |
| ENVIRONMENTAL |
| Operating Temperature |
-10ºC~+50ºC |
| PHYSICAL CHARACTERISTICS |
| Dimensions(W*D*H) |
67.3*18.25*31.9mm |
| Mass |
28g |
Audited Supplier 
){kind=link}