FC53-Li Thermal Transfer Overprinter for Soft Packaging Printing Coding Machine TTO

• Customization: Available
• Certification: ISO, ISO9001
• Transfer Mode: Thermal Transfer
• Model NO.: FC53-Li
• Method: Sublimation Transfer Printing
• Usage: Bag
• Printing Speed: 40-600mm/s
• Printing Width: 53mm
• Specification: 190*220*236mm
• Trademark: HPRT
• Origin: Xiamen
• HS Code: 84433990

Product Description

FC53-Li Thermal Transfer Overprinting

HPRT label and soft packaging code solutions will help you create more value.
FC53/32 is suitable for food, medicine, daily chemical, household paper and other types of soft packaging variable code (including traceability code, barcode) printing. We regard reducing total cost of ownership (TCO) as the key to TTO design, and FC53/32 goes with HPRT original ribbon to ensure the best print effect and lower use cost.




Specification:

Structure	All-metal structure
Printing Method	Thermal Transfer Printing
Resolution	300dpi (12 dots/mm)
Printing Speed	40-600mm/s
Printing Width	53mm
Print Area	53mm * 75mm (Intermittent) 53mm * 100mm (Continous)
CPU	32-bit RSIC
Flash Memory	8MB (minimun)
Dynamic Memory	16MB(minumum)
Real-time Clock Function	STD (Battery Lifespan: min 3 years)
Sensor	Ribbon Tension Detection Thermal Head Position Detection Cover Open Detection TPH over Temperature Detection Ribbon Break Detection
Soft Package Detection	Electromagnetic Induction or Synchronizer
Soft Package Material	PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, CPP, PE,VMPET, VMCPP and other films and composite films
Capacity for Ribbon Loading	1 "mandrel with a maximum length of 1100 meters
Ribbon Type	Type: Wax / Resin-based width: 20 mm (0.79 ") to 55 mm (2.17")
Ribbon Saving	Support interlaced, radial, multiple print signals, digital ribbon saving printing, ribbon back and other ribbon saving modes; The minimum ribbon interval between two lines of printing is not more than 0.5mm
Air Pressure Supply	Max. 6 bar/90
Airflow Consumption	As low as 4 ml / print at 2.5 bar
Print Density Level	Level 31
USB Interface	STD, 1 port, type B connector, USB device 2.0
USB HOST	STD, 1USB disk connection port ; USB Host 2.0, automatic detection and setting of connections
Serial Port	STD 1 port, female D-SUB 9-pin connectorDefault 9600, 8/N/1, variable baud rate and format
Ethernet Interface	STD 1 port, RJ-45 connector, IEEE802.3 10/100BASE-T
Hardware Interface Port	Input: "Print Start" and a configurable input ; Outputs: fault, warning and 2 configurable outputs
Power Supply	Internal switching power supply module, I / P: AC90V-264V, 47/63 Hz; 150 VA
Software	HPRT Format Designer
Certification	CCC
Environmental Conditions	Operation: 0 to 40 ° C @ humidity 10% to 90% non-condensing Storage: -40 to 60 ° C @ humidity 10% to 90% non-condensing
Machine Dimension	Printer: height less than 190 mm, width less than 220 mm, depth less than 236 mm Controller: height less than 170 mm, width less than 263 mm, depth less than 190 mm
Machine Weight	Printer: less than 8 kg ;Controller: less than 5 kg
Warranty	Printer: 3 years ; Controller: 3 years ; Thermal head: 6 months or 50 KM;Platen: 5 years