| Customization: | Available |
|---|---|
| Automatic Grade: | Automatic |
| Principle of Classification: | Thermal Inkjet Technolog |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Structure
|
All-metal structure
|
|
Printing Method
|
Thermal Transfer Printing
|
|
Resolution
|
300dpi (12 dots/mm)
|
|
Printing Speed
|
40-600mm/s
|
|
Printing Width
|
53mm
|
|
Print Area
|
53mm * 75mm (Intermittent)
53mm * 100mm (Continous) |
|
CPU
|
32-bit RSIC
|
|
Flash Memory
|
8MB (minimun)
|
|
Dynamic Memory
|
16MB(minumum)
|
|
Real-time Clock Function
|
STD (Battery Lifespan: min 3 years)
|
|
Sensor
|
Ribbon Tension Detection
Thermal Head Position Detection Cover Open Detection TPH over Temperature Detection Ribbon Break Detection |
|
Soft Package Detection
|
Electromagnetic Induction or Synchronizer
|
|
Soft Package Material
|
PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, CPP, PE,VMPET, VMCPP and other films and composite films
|
|
Capacity for Ribbon Loading
|
1 "mandrel with a maximum length of 1100 meters
|
|
Ribbon Type
|
Type: Wax / Resin-based
width: 20 mm (0.79 ") to 55 mm (2.17") |
|
Ribbon Saving
|
Support interlaced, radial, multiple print signals, digital ribbon saving printing, ribbon back and other ribbon saving modes;
The minimum ribbon interval between two lines of printing is not more than 0.5mm |
|
Air Pressure Supply
|
Max. 6 bar/90 psi
|
|
Airflow Consumption
|
As low as 4 ml / print at 2.5 bar
|
|
Print Density Level
|
Level 31
|
|
USB Interface
|
STD, 1 port, type B connector, USB device 2.0
|
|
USB HOST
|
STD, 1USB disk connection port ;
USB Host 2.0, automatic detection and setting of connections |
|
Serial Port
|
STD 1 port, female D-SUB 9-pin connectorDefault 9600, 8/N/1, variable baud rate and format
|
|
Ethernet Interface
|
STD 1 port, RJ-45 connector, IEEE802.3 10/100BASE-T
|
|
Hardware Interface Port
|
Input: "Print Start" and a configurable input ;
Outputs: fault, warning and 2 configurable outputs |
|
Power Supply
|
Internal switching power supply module, I / P: AC90V-264V, 47/63 Hz; 150 VA
|
|
Software
|
HPRT Format Designer
|
|
Certification
|
CCC
|
|
Environmental Conditions
|
Operation: 0 to 40 ° C @ humidity 10% to 90% non-condensing
Storage: -40 to 60 ° C @ humidity 10% to 90% non-condensing |
|
Machine Dimension
|
Printer: height less than 190 mm, width less than 220 mm, depth less than 236 mm
Controller: height less than 170 mm, width less than 263 mm, depth less than 190 mm |
|
Machine Weight
|
Printer: less than 8 kg ;Controller: less than 5 kg
|
|
Warranty
|
Printer: 3 years ; Controller: 3 years ;
Thermal head: 6 months or 50 KM;Platen: 5 years |
){kind=link}